surface roughness
英
美
网络 粗糙度; 表面平整度; 表面粗度; 表面粗糙度; 表面光洁度
双语例句
- The advantage is that electrical discharge machining processes with good surface roughness and machines metal of any hardness.
电火花加工的主要优点是可获得较低的表面粗糙度，并且可以加工任何硬度的金属。 - All of the casting dimension precision, surface roughness and material control have reached national standard.
铸件尺寸精度，表面精糙度及材质控制均达到国家标准要求。 - However, too-high bias voltage can cause the increase of surface roughness and stress, and decrease the LIDT.
然而，辅助偏压太高会引起粗糙度和应力的上升，以及损伤阈值的下降。 - The adhesive strength of the films to the substrates, diamond-coated tool wear and surface roughness of the workpiece were further studied by turning glass fiber reinforced plastic cylindrical bars.
通过玻璃纤维增强塑料的车削试验，研究了薄膜与基体之间的附着强度、涂层刀具的磨损和加工工件的表面粗糙度。 - A new approach for decreasing the amplitude characteristic deviation of Gaussian filter in surface roughness measurements is presented.
提出了一种减小表面粗糙度测量用的高斯滤波器幅度传输特性偏差的新方法。 - Experimental Study of Abrasive Belts Grinding Titanium Alloy's Surface Roughness
砂带磨抛钛合金表面粗糙度的试验研究 - The effects of grinding parameters on surface roughness of marine propeller blade were studied by using orthogonal test.
通过正交试验研究了磨削参数对船用螺旋桨叶片表面粗糙度的影响。 - The shape coefficient and friction coefficient are used to reflect the characteristics of particle outline and surface roughness respectively.
用形状系数与粒间摩擦因数分别反映颗粒的外轮廓特征和表面粗糙度。 - The effects of vibration parameters on the surface roughness and the tool wear are analyzed.
研究了不同振动参数对工件表面粗糙度和刀具磨损量的影响规律。 - A road surface roughness test system based on notebook computer is designed and realized in this paper.
本文设计和实现了基于便携式计算机的车载激光路面平整度测试系统。 - There is an optimum surface roughness which will produce minimal arc energy and minimal wear rate.
表面粗糙度有一个最佳值，在这个表面粗糙度下电弧能量最小、质量磨损率也最小。 - The methods described herein are some of the suitable methods for measuring surface roughness.
本文所述方法是适合测量表面粗糙度的一些方法。 - Effect of Different Test Method on Measurement Result of Surface Roughness of Planar Surfaces on Silicon Wafer
测试方法对硅片表面微粗糙度测量结果影响的研究 - High machining precision and low surface roughness may improve the main spindle rotating precision and decrease the wear of the main spindle.
提高主轴的加工精度和降低表面粗糙度，可提高主轴的旋转精度和减少主轴的磨损。 - For a good bond, an adhesive must counteract the effect of surface roughness and boundary layers.
为了取得很好的粘结，粘结剂必须能克服表面粗糙和边界层的反应。 - The surface roughness and hydrophilicity of the PLLA-PDXB composite were obviously enhanced.
复合材料的亲水性和粗糙度明显增加。 - The surface roughness of bath bottom, depth of tin liquid and temperature all affect the bubble forming considerably.
槽底表面粗糙度、锡液深度及温度对气泡形成有很大影响。 - Finally the relationship between nanotopography and silicon surface roughness was briefly introduced.
最后简单介绍了纳米形貌和硅片表面微粗糙度之间的关系。 - The influences of cutting speed on cutting forces, surface roughness, surface microstructure, and tool wear have been studied by the experiments.
深入分析了铣削速度对铣削力、表面粗糙度、表面形貌和刀具的磨损的影响。 - Research on Influence of Cutting Tool Wear on Surface Roughness in Green Machining
绿色加工中刀具磨损对表面粗糙度影响的研究 - Surface roughness had little effect on oil rejection.
陶瓷膜表面粗糙度对油截留率基本没有影响； - Study on the Effects of Milling Parameters for Moso Bamboo on its Surface Roughness
铣削参数对毛竹表面粗糙度影响的研究 - This is related not only to the wearability, the surface roughness and the oxidation resistance of coating but also to the hardness, the toughness and the bending strength of carbide alloy A.
这既与涂层的耐磨性、表面粗糙度和抗氧化性能有关，也与硬质合金A的硬度、韧性和抗弯强度有关。 - Variations in surface roughness of both guide and fiber surfaces have a marked effect on friction.
导纱器和纤维表面粗糙度的变动，对摩擦力都有显著影响。 - The microhardness and surface roughness of specimens before and after shot peening was studied and analysed.
分析研究了喷丸强化处理前后的显微硬度和表面粗糙度。 - Based on the digital image processing technique, a method for automatically measuring the three-dimensional parameters of casting surface roughness is put forward.
提出了一种用计算机对铸造表面粗糙度进行数字图像处理和三维参数自动检测的方法。 - It is found that the surface roughness influenced by wheel speed and grinding depth can be attributed to the changing of undeformed chip thickness.
研究发现：砂轮速度和磨削深度对表面粗糙度的影响都可归结为未变形切屑厚度的改变。 - Analysis and Research on the Surface Roughness of the Copper Multilayer Interconnection CMP in ULSI
ULSI中多层Cu布线CMP表面粗糙度的分析和研究 - Influence of surface roughness of hard alloy on adhesion of diamond coating
硬质合金表面粗糙度对金刚石涂层附着力影响的研究 - Different surface roughness determines corresponding different degrees of laser scattering.
反映出不同粗糙度表面对激光散射程度不同。